Imported epoxy color sand upgraded products are based on the traditional "epoxy color sand" technology improvement and raw material optimization of the latest products, imported from Germany, matte frosted surface. The hardness is so high that it is almost equal to the ceramic tile. This product has super anti-aging, acid and alkali resistance and corrosion resistance.The performance indicators are at the top level in the industry.

This product uses green epoxy resin as the raw material, because of the characteristics of the raw material itself determines its waterproof, anti-fouling, anti-fungal properties. Epoxy color sand upgraded products are rich in color, with strong functionality and decoration, and have a strong anti-ultraviolet ability, even if exposed to the outdoor environment, there will not be discoloration, yellowing and qualitative change.

Technical parameters：

Scope of use：

All kinds of ceramic tiles, glass tiles, quartz boasts, ceramic tiles, mosaics and other seams, waterproof, mildew-proof, beautiful seams. Bath rooms, bathrooms, windowsills, countertops and other gaps, floor walls of all kinds of edges of the United States seams.

Use method：

1.Clean up the cracks in the tiles with a seam cleaning knife and keep them dry. 
2.Stir the powder and curing agent at 10:1. 
3.Press the seam filler into the gap with a scraper at a 45-degree angle, fill it and scrape off the remaining material. 
4.Start scrubbing (multiple times) after about 20-30 minutes of construction, wet the sponge and wring it dry, and scrub the brick line by drawing until the surface is clean and free of residue. 
5.It can be scrubbed and cleaned many times, and the light can be collected by gently wiping the gap with your fingers after 40-60 minutes. 
6.Protect the surface after construction and wait for 4-7 days to fully solidify before normal use.

Matters needing attention：

1.Avoid long-term contact with uncured products by eyes and skin, and do not let children touch them. 

2.If the construction is interrupted for more than 20 minutes, the colloid will slowly solidify in the mixed pipe. 
3.For unused glue in the hose, unscrew the mixing tube and close the lid so that you can continue to use it next time. 
4.When the temperature is low in winter, it needs to be heated before use, so that the construction can be more smooth. 
5.Beauty pattern paper must be affixed to the construction of rough surface tiles and corner lines.

Storage and transportation：

Transport: moistureproof, rainproof, sunscreen, high temperature protection, stay away from heat source, handle with care, do not squeeze and collide. Storage: sealed and stored in a low temperature, dry place. 
It is recommended to store in an environment with a temperature of 5-25 °C and humidity ≤ 50%RH for 12 months.