This product is an one-component, neutral curing, high adsorption, with. It has good environmental protection, elasticity and strength. And anti-mildew, anti-mildew. Water, insect control and other superior efficacy. The perfect companion in the gap!

1.Neutral curing: non-corrosive to metal, coated glass, concrete, marble, granite and other building materials, widely used. 
2.One-component curing, easy to use, good extrudability and thixotropy in the temperature range from 4 °C to 40 °C. 
3.The sealing effect is good. 
4.High adsorption, avoid cracks, shedding, edge. 
5.It has good environmental protection, elasticity and strength. 
6.Anti-aging, UV-resistant, ozone-resistant, solidified in a variety of environments can maintain good elasticity. 

7.Generally used for home decoration bonding. The places where sewing treasure is generally used in home decoration are: wooden thread back mute, sanitary ware, toilet, cosmetic mirror in toilet, gap between sink and wall, etc., all of these places can use sewing treasure!

Technical parameters：

Use method：

1.First remove dirt, grease, moisture and old fillers, if the gap is greater than 1.2x1.2 centimeters, you need to use fillers. 

2.Cover the adjacent sides of the excuse with masking tape. 
3.Cut the nozzle according to the desired tape size, pierce the seal, and place the hose in the glue gun. Put the nozzle into the seam and extrude the silica gel to fill the gap at a temperature higher than 5 °C. 
4.Remove the masking tape immediately after wiping it flat, and close the lid. 
5.Wipe your hands and tools first. And then clean it. It doesn't stick to your hands after 30 minutes. It is usually cured within 24 hours. Unused seals should be kept in a dry place below 27C.

Meet the criteria: 
American standard ASTM C 920-05 25 industry standard: 25HM JC/T882-2001 u! 
National standard: ISO11600-G-25HM u. 
Storage and expiration date: 
Under the storage condition of 25 °C and relative humidity less than 50%, it is kept for 12 months from the date of production. Usage restrictions: 
A small-scale test should be done before use on the surface of building materials containing paint or paint, so as not to cause damage to the building materials.

Meet the criteria: 
American standard ASTM C 920-05 25 industry standard: 25HM JC/T882-2001 u! 
National standard: ISO11600-G-25HM u. 
Storage and expiration date: 
Under the storage condition of 25 °C and relative humidity less than 50%, it is kept for 12 months from the date of production. Usage restrictions: 
A small-scale test should be done before use on the surface of building materials containing paint or paint, so as not to cause damage to the building materials.